EB11 Dual Stage Batch Controller

SKU EB111D0FM

Availability:

In stock

Availability:

In stock

$1,051.60 - $1,051.60

$1,051.60

$1,051.60 - $1,051.60

$1,051.60

The FLOMEC EB11 “EasyBatch” is a dual-stage batch controller designed to create an efficient and accurate dispensing experience.

Mountable either directly onto a FLOMEC® flow meter or remotely and compatible with multiple types of industry signals, the EB11 allows the user to control the volume of fluid dispensed into their process, while the large 7-digit display with backlight enables easy reading of the batch status in either light or dark conditions. Housed in an IP66/67-NEMA4X-rated glass-reinforced nylon enclosure for increased impact and corrosion resistance, particularly in washdown environments.

Typical applications include bottling or packaging, diluting concentrates, and addition of ingredients.

Features

2 digital NPN outputs with a current rating of up to 300 mA for direct control of solenoid valves or to connect to relays to allow for the control of large valves and pumps.
Easy to use 2 button controller
Weather-resistant and durable IP66/67 - NEMA4X enclosure
Easy-to-read backlit 7-digit display
Retained settings after power loss

Specifications

Instrument Type: Batch Controller
Mounting Type: Meter and Stem Mount, Wall, Pipe or Panel mount
Operating Temperature Range: -10°C - 60°C

Applications

Not sure this is the right meter for your application?

Use our flow meter selector to compare options.

Quantity

FREQUENTLY ASKED QUESTIONS

Do I need single or dual stage batch control?

Single stage batch control describes control systems that use a single valve, typically on 40 mm and smaller pipes and/or lines. For 50 mm lines a smaller bypass line is used to provide fine control at the end of the batch; the larger line shuts off first with final flow being added through the smaller line. It also allows a slower operating valve on the main line and less hydraulic shock through the pipe on closure.

Do I need power for the batch controller?

The EB11 needs 10-30 Volts. Solenoid valves up to 24v/7.2w can have a common voltage source to the EB11. See our EB11 Design Guide for more information.

How do I choose that right solenoid for my system?

The choice of solenoid depends on a variety of specifications. The voltage, the pipe size, the pressure in the line, the chemical compatibility, the close rate and whether the valve is normally open or normally closed. The power rating is important to determine whether a mechanical relay is required between the EB11 and the solenoid, the maximum rating for a solenoid that can be wired directly to the output of the EB11 is 7.2 watts at 24v DC. See our See our EB11 Design Guide for more information on solenoid selection.

Can I pause the batch?

The batch volume can be paused and restarted at any time with the touch of a button.

Can I set multiple batch totals?

The EB11 can only be set for a single batch volume at a time. However, the batch setting can be easily altered up and down with a few button presses.

Can I use the EB11 to start and stop a pump?

The EB11 can be used to turn on and off a pump using a mechanical relay between the EB11 and the pump. The more accepted and accurate method is to use an automatic valve to shut off flow. This method has a faster response and gives more repeatable batch volumes.

Can the EB11 be used in areas containing flammable liquids such as unleaded petrol or alcohol?

No. The EB11 can only be used in areas where there is no risk of igniting an explosive gas or dust atmosphere e.g. petrol, solvents, alcohols.